Manufacturing method of aluminum honeycomb core
This technical field provides a manufacturing method of aluminum honeycomb core for the production process of aluminum products, including the following steps: S1. The aluminum foil narrow material is cut into several aluminum foil strips of the same length; S2. Multiple aluminum foil strips are stacked one by one with the edges aligned. After each layer of aluminum foil strip is stacked, the aluminum foil strip and the upper aluminum foil strip are pressed and fixed, and the core strip is obtained after cutting; The manufacturing method of aluminum honeycomb core only needs cutting, pressing, bonding, drawing and other processes, which simplifies the process flow, reduces the input of equipment and labor, and the power loss of hot pressing process is small, reducing the production cost.
Aluminum honeycomb core special sawing
The technology provides a special sawing machine with aluminum honeycomb core, including a sawing machine and a table. A guide rail 13 is arranged in the workbench 2, a traction device 10 is arranged at both ends of the guide rail 13, a saw car 1 is installed on the guide rail 13 through a fixed seat device 12, a saw blade 3 is arranged on the saw car 1, the center of the saw blade 3 is connected with the first driving device 4, and a press plate device 7 is arranged above the workbench 2. The special sawing machine for aluminum honeycomb core provided by the technology adopts the down blade reverse sawing method to cut aluminum honeycomb core. The section of aluminum honeycomb core is smooth without burr, and the surface accuracy of the section is less than 0±. At the same time, the efficiency of sawing aluminum honeycomb core is improved.
